When gas gets under a geomembrane, operations-impairing bubbles can form. A number of reasons may be responsible, such as installation damage, poor seaming, or a lack of appropriate construction quality assurance (CQA) measures like liner integrity surveys. These bubbles are commonly referred to as “whales,” and they can impact wastewater facilities, manure lagoons, ponds and other lined installations.

As this photo demonstrates, even 6 in. (150 mm) thick concrete slabs are insufficient ballast to prevent whales due to trapped air and rising groundwater under a geomembrane liner.

Whales in Geomembranes
We thank Samer Hasan (BMC-Gulf) for sharing the photo and for the conversation with Ian Peggs (I-CORP INTERNATIONAL) that connected us with the image.

We must stress that these anomolies are avoidable. Good design and specification, proper installation techniques, and appropriate CQA should prevent these unusual occurrances. But to help further illustrate the impact these whales can have, we have a few more photographs.

Whales in Geomembranes
Giant whales formed at a mine tailings pond over peat after tailings slurry was added. Photo courtesy of FLI.

 
Whales in Geomembranes
A whale forming atop another whale! Methane gas under a wastewater treatment pond (WWTP). Photo courtesy of I-CORP INTERNATIONAL.

Whales in Geomembranes at a Waste Water Treatment Plant
Many whales at a waste water treatment plant.
Trapped methane gas is the culprit.
Photo courtesy of I-CORP INTERNATIONAL.