ASTM Article

0
The November 2006 issue of ASTM's Standardization News has an article available on-line about D35's newly developed standard D7178 - Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property. Learn more here.;

Calculation Method

0
ASTM International Committee D35 on Geosynthetics has developed a new standard that is an important step toward the improvement of filtration design for non-woven geotextiles. The standard, D 7178, Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property, will provide engineers and researchers a common basis for accurate determination of an important products property… Learn more here.;

Buyers' Guide

0
Nonwovens Industry's 37th Annual Guide lists suppliers and producers of nonwovens around the globe in one comprehensive listing. Learn more here.;

Geomembrane Spark Testing and Difficult Installation Points

0
"When asked what voltage setting was used to perform spark testing on a pipe penetration weld the operator said “Dunno, I just turned it to the max as stated in the instructions”! This is just the right way to miss leaks, as happened..." Ian Peggs of I-CORP INTERNATIONAL takes a look at what is occurring during spark testing.

AMCOL International (Parent Company of CETCO) Announces Purchase of Australian Bentonite Mining Rights and...

0
AMCOL International Corporation (NYSE: ACO) today announced it has bought Australian mining rights from Phoslock Water Solutions. A processing facility, located in Miles, Queensland was also purchased which will managed & operated by Volclay Pty. Ltd. Larry Washow, AMCOL president and chief executive officer, said, “The investment is complementary to our existing bentonite business which has been in operation for over 30 years. Acquiring these local bentonite mineral rights will not only strengthen our position in the metalcasting market, but will allow our Australian subsidiary, Volclay Pty. Ltd, the ability to grow in local construction markets and provide a valuable addition to AMCOL’s bentonite resources in the Asian region.” Les Bone, Volclay Pty. Ltd. managing director, added, “We are excited at the opportunity to increase our service level and provide a cost-effective solution to imported bentonite. This access to high-quality bentonite enables Volclay to offer a more consistent product blend. ” Terms of the transaction were not disclosed.

Conference Participation

0
ENGEPOL will be participating of the largest mining fair in Latin America - EXPOMIN 2006. The EXPOMIN 2006 will be held 23-27 May 2006 in the Espacio Riesco, Santiago, Chile. Your visit at ENGEPOL booth number 39C will be highly appreciated. If you require a free invitation, please feel free to contact ENGEPOL by calling their mobile phone number +55 11 9179 5906 as from 23 May. Learn more here.;

The Next Big Thing?

0
According to Iceland Review, borehole samples in Iceland indicate that gold may be mined there. Studies are on-going as to whether the gold content in the rock is significant enough to justify and pay for the processing. Geosynthetic containment systems have become vital to controlling mining-related pollution while creating efficiencies in the processing system: product is not lost. Learn more here.;

Vector Expansion

0
Vector Engineering, has expanded its central geotechnical laboratory, which services the mining and solid waste sectors. The major addition involves a new loading system for testing pipe deflection and geomembrane liner puncturing. Vector's lab can now simulate heap heights exceeding 200 meters. Also, Vector has increased the load capactiy of its large scale direct shear apparatuses to 200 psi, almost twice their previous limit. Learn more here.;

ASTM D4716-01 Revision

0
WK2334 - Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head is a work item revision to existing standard D4716-01. Learn more here.;

New Approved ASTM Standard

0
D5048-03 - Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame (revised). Learn more here.;

7ICG Conference Report & Pictures

0
7IGC 22-27 September 2002 in Nice was a fantastic success! Over 1,200 attendees, all booths sold out(and a few extras), elections, four unique educational tracks (300+ papers), dining, dancing, footballand so much more.