IGS-NA General Assembly Issues Open Invite and Agenda to Geo Community

When Geotechnical Frontiers 2017 convenes in Orlando, Florida, it will bring together members of the geosynthetics and larger geotechnical engineering communities. The conference, which occurs every six years, combines...

Training Lectures and Panel Discussions at GeoAmericas 2016

0
The 49 technical sessions at the 3rd Pan-American Conference on Geosynthetics (GeoAmericas 2016) will include multiple high-quality panel discussions and training lectures. Diverse topics address geosynthetic installation, the...

Tensar's Euro Route in 2012

One of the most important international football tournaments is about to take place: Euro 2012. The nations of Poland and Ukraine will play host to the quadrennial engagement, and both countires have invested millions of euros in new construction to support the event. In the Polish seaport of Gdansk, a 17.9 km bypass was needed to improve traffic flow. Tensar International's TriAx® design solution has been used in the sub-base to help combat differential settlement across the poor soil of the Wistula river delta and minimize frost heave caused by severe winters.

NAGS/GMA Short Course in Atlanta Cancelled

0
The North American Geosynthetics Society (NAGS) and the Geosynthetic Materials Association (GMA) have co-organized a series of geosynthetics short courses here in the second half of the year with the support of numerous industry sponsors and expert instructors. The organizers have regrettably announced, however, that next week's event in Atlanta has had to be cancelled. Learn more here.;

ACH Tour Announced for Geosynthetics 2009

0
ACH Foam invites attendees of Geosynthetics 2009 to take a tour of ACH Foam Technologies' Plant in Murray, Utah on Thursday, 26 February 2009. This free tour--transportation from the convention center provided--will take place from 8:30 - 10:45 am. A history of geofoam will be provided and participants will learn about applications for geofoam, installation, and long-term performance. A plant tour and manufacturing information rounds out the trip. Email Terry Meier (tmeier@achfoam.com) or call +1 801 599 2220 for more information or to take part. Learn more here.;
Image of Professor Jorge Zornberg seated beside a materials testing table. From the University of Texas - Austin.

Jorge Zornberg on Siamak’s Geosynthetics Podcast

0
Our good friend Siamak Paulson, an Australia-based engineer, continues his series of interviews with not just Australian geosynthetics experts but luminaries from around the world. The latest video podcast...

Update: ASTM D35

ASTM's Committee D35 on Geosynthetics will be meeting June 26 in Denver. "Geosynthetics in Roadways and Pavements" will be the focus of Subcommittee 01 on Mechanical Properties that day. Regular Task Group meetings on properties frequently used to characterize geogrids and geotextiles used in roads and pavements will be sandwiched around an hour long update by Steve Perkins on the encouraging developments and correlations of index, bench-scale, and full-scale separation/stabilization test methods. Learn more here.;

Tensar Georgia Plant Returns to Full Operation Following Fire

Tensar International Corporation, the leader in geosynthetic soil reinforcement and stabilization, today announced its manufacturing facility in Morrow, Ga. has returned to full operation following a fire on June 22. The plant was cleared for re-entry by the Clayton County Fire and Emergency Services Department on Saturday June 25. The Tensar team conducted a thorough site evaluation and restarted manufacturing on Sunday, June 26. Shipping began today.

EDANA 2013 Numbers on Nonwovens in Europe

31 March, 2014, Brussels, Belgium – EDANA, the International Association Serving the Nonwovens and Related Industries today disclosed the preliminary European annual statistics for 2013. This release offers a comprehensive picture of...

D35 Meeting Registration Reminder

0
ASTM Committee D35 will meet 8-11 June 2010 in St. Louis, Missouri. The current schedule includes the second meeting on geocells, reinforced geomembrane seams, asperity height, GCL design guidance, and much much more. Participants are reminded that the cut-off date for hotel registration is April 29. The cut-off date for pre-registration is June 2. Visit the D35 page for registration information. Learn more here.;

GeoRegina 2014 Extends Abstracts Deadline to January 31

0
Organizers for the Canadian Geotechnical Society's (CGS) 67th Canadian Geotechnical Conference have extended the abstract submission window to January 31. GeoRegina 2014 (www.georegina2014.ca) will be held 28 September -...

Lining a New Landfill near Porto

0
With a combined population of 440,000, the communities of Santa Maria da Feira and Vila Nova de Gaia, Portugal, produce 175,000 tons of solid waste annually. Waste management is...

R. van Gelder Nominated as a New Member of the Supervisory Board of Royal...

0
During the Annual General Meeting of Shareholders on Thursday 8 April 2010 in Almelo, the Netherlands, the Supervisory Board of Royal Ten Cate will propose Mr R. van Gelder to the Meeting of Shareholders for appointment as a member of the Supervisory Board. Mr Van Gelder (civil engineer, aged 64, of Dutch nationality) is a former CEO of Royal Boskalis Westminster (1993-2006) and currently CEO of Heijmans N.V. (until May 2010). He is a supervisory board member of SBM Offshore N.V. and Holcim Western Europe Ltd. and a member of the board of the Vereniging Effecten Uitgevende Ondernemingen (Association of Securities-Issuing Companies).

Curso: Obras Sobre Solos Moles

Curso: Obras Sobre Solos Moles. Conhecimentos atualizados no âmbito das obras de aterro sobre solos moles. 23 e 24 de maio de 2014 O curso destina-se a transmitir conhecimentos atualizados no âmbito...

Geo-Frontiers 2011: Call for Student Papers

0
Students are invited to submit abstracts for publication in the conference proceedings and presentation during Geo-Frontiers 2011. Papers of interest include new research, design initiatives and innovative geosynthetic solutions. Five students will be selected as finalists for the Geosynthetics Student Paper Competition. The winner will receive a $500 award and $250 for travel expenses. Runners-up will receive a $250 award and $250 for travel expenses. Read more.

Tensar Improves Energy Efficiency

Tensar International recently installed a magnetic fuel treatment system from Maxsys to one of their gas-fired, steam-raising boilers. The project has reported cut gas consumption by 5.78%--a considerable financial savings in the manufacturing process and an admirable environmental benefit. Also, extensive analysis by the Blackburn-United Kingdom facility's chief engineer has found that boiler efficiency has improved by 5.46%. Read more in the release.

GMA Submits Comments to EPA

0
The Geosynthetic Materials Association (GMA) has provided significant leadership in public discussions on the future of US coal ash facility construction rules. With current discussion regarding whether facilities might be governed under Subtitle C or D regulations, GMA has spoken at public gatherings and submitted formal comments and documents whenever the Environmental Protection Agency (EPA) has called for input. The latest comments regarding the storage of Coal Combustion Residuals (CCRs) were submitted 14 October 2010. We encourage readers to follow this developing story and the important work GMA is carrying out. Learn more here.;

Geosynthetica's 2010 Agenda

0
Geosynthetica supports its underwriters and the geosynthetics field on many fronts: in magazine articles, in daily news on its site and as an approved provider to Google News, through webinars, with market research, and in many other ways. One of the important ways we deliver geosynthetics information around the world is through support of conferences, particularly of those that are not exclusive to geosynthetics or which have not yet realized their full market or regional potential in their utilization or understanding of geosynthetic technologies. In 2010, some of the events for which Geosynthetica.net is serving as a cooperating organization / media sponsor include: ** EC10 in Dallas, Texas, USA -- 16-20 February 2010; ** 7th Cooperation for Waste Issues in Kharkiv, Ukraine -- 7-8 April 2010; ** Polymers in Photovoltaics 2010 in Cologne, Germany -- 20-22 April 2010; ** LatAm Mining Congress 2010 in Coral Gables, Florida, USA -- 27-29 April 2010; ** Global Waste Management Symposium 2010 in San Antonio, Texas, USA -- 3-6 October 2010. **** To learn more about how you can be part of these events and others with Geosynthetica.net, or how Geosynthetica can work with you to expand your reach, contact Elizabeth Peggs at elizabeth@geosynthetica.net.

GMA News: Henderson Re-Elected

0
Quick word out of the Geosynthetic Materials Association (GMA): John Henderson of Tencate Geosynthetics has been re-elected as Chairman the GMA Executive Council. This will be John's second term. Writes GMA executive director, Andrew Aho, "We appreciate John’s service and look forward to his continued leadership as Chairman." In the past couple years, GMA has made great strides in communication with US Congressional legislators and infrastructure committees. Learn more here.;

Update: Asia Mining 2009

0
The latest conference update from the Asia Mining Congress 2009 is available. The current issue includes information on the latest speakers from mining, manufacturing, governments, and investment groups; workshops; sponsors; and the most current event brochure. The conference will be held 23-27 March 2009, Singapore. Read the newsletter online. Learn more here.;

Performance of Flexible Pavement Systems Containing Geosynthetic Separators

0
From TRB's Research-in-Progress Library: Richard Coffman is investigating if geosynthetic separators have prevented plastic "clayey" fines from migrating into the base layer from a prepared subsoil. The in-situ fines content at the site will also be compared with the preplaced quarry obtained fines content to determine if additional fines are created during transportation, placement, and use of the roadway base. Base course drainage, strength, and modulus are important parameters that must be considered in the design of a roadway system. Pavement service life is maintained if the base course is permeable, strong, and rigid. Two recent Mack Blackwell Transportation Center (MBTC) projects have focused primarily on the rigidity of pavement systems. MBTC Project 2027 focused on the strength, permeability, and rigidity of quarry obtained, preplaced, Class 7 base course using laboratory tests; while MBTC Project 3013 is investigating the effects of geosynthetic separators, geosynthetic reinforcement, and base course thickness on pavement system rigidity. Learn more here.;

Riverbank Stabilization in W.Va.

0
In Charleston, West Virginia, an emergency plan has been approved to keep a road from collapsing into the Kanawha River. The US Army Corps of Engineers is assisting the project to install geosynthetic reinforcement and soil protection along Kanawha Boulevard. Riprap will also be installed in an erosion control zone. Learn more here.;

New Manufacturing Facility Shows India’s Rise in Geosynthetics

0
India’s fast-developing economy and large population places extra pressure on the nation to execute large-scale infrastructure development. The resulting investment in roadways, railways, power-grid expansion, and water resources creates...

Geosynthetics Conference kicks off in Abu Dhabi

0
The Municipality of Abu Dhabi City-sponsored Geosynthetics (environment-friendly materials) Middle East Conference 2011 got to a great start today in Abu Dhabi featuring participation of an elite panel of regional and global roads and infrastructure experts. The event, which runs for two days, is organized by German Plastics Centre SKZ in collaboration with the German Chamber of Commerce with the aim of promoting the commitment to a sustained and environment-friendly infrastructure. During the Conference, the Municipal Infrastructure and Assets Sector at the Municipality of Abu Dhabi City presented a working paper highlighting the key road and infrastructure projects undertaken by the Municipality in the past.
Geofabrics Australasia

Geofabrics Australasia Develops Video Tools

Geofabrics Australasia has developed a suite of videos that explain various standardized tests on geosynthetics. While these videos focus specifically on Australian standards, they are highly applicable to testing...